CMC 10 Dossier (updated)

Modified on Wed, 28 Aug at 11:41 AM

There are now requirements for Processsed Manure in FPR. Currently Processed manure is the only animal by-product that can be used in EU fertilising products:

The requirements are listed verbatim below, want certification? EFCI Register can efficiently support you to get CMC 10 products certified.

------

CMC 10: DERIVED PRODUCTS WITHIN THE MEANING OF REGULATION (EC) No 1069/2009

1. An EU fertilising product may contain derived products within the meaning of Regulation (EC) No 1069/2009 having reached the end point in the manufacturing chain as determined in accordance with that Regulation, and which are listed in the following table and as specified therein:

The component material

Additional requirements

Processed manure fulfilling the conditions in Article 3(d) of Delegated Regulation (EU) 2023/1605 (1)

1.1. An EU fertilising product may contain processed manure only if it was treated to reach an end point according to Regulation (EC) No 1069/2009 at the latest 36 months before signing the EU declaration of conformity for the respective product and the material underwent additional processing so that at least one of the following conditions is met:

(a) at least 90 % by dry mass of the material can pass through a sieve with a mesh of 0,25 mm;

(b) the material has been granulated under pressure, pelletised, dried at temperatures higher than 100 °C or has undergone any equivalent process that ensures that the content of viable weed seeds and plant propagules in the processed manure is no more than 3 units/l; or

1.2. The material referred to in point 1.1 may undergo one or more of the following additional processes:

(a) the processing methods referred to in CMC 2;

(b) biological treatment involving nitrification and denitrification;

(d) processes to recover nutrients and/or organic carbon, without the intention to otherwise modify the material;

(e) chemical processing to modify the pH without the intention to otherwise modify the material;

(f) physical processing to remove water and to transform the material into powder, granules or pellets, without the intention to otherwise modify the material.

1.3. Additives needed in the processing referred to in points 1.1 and 1.2 may be used provided that:

(a) the additive complies with the requirement set out in point 2 of CMC 1;

(b) the concentration of the additives needed in each of the processes does not exceed 5 % of the weight of the processed manure or fraction used as input in the respective process.

1.4. The processed manure shall contain no more than 6 mg/kg dry matter of PAH16 (2).

1.5. The processed manure to be used as component material in an EU fertilising product shall be stored in a way that protects it against precipitation and direct sunlight.

(1)

Commission Delegated Regulation (EU) 2023/1605 of 22 May 2023 supplementing Regulation (EC) No 1069/2009 of the European Parliament and of the Council as regards the determination of end points in the manufacturing chain of certain organic fertilisers and soil improvers (OJ L 198, 8.8.2023, p. 1).

(2)

Sum of naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[ghi]perylene.

2. Where compliance with the requirement set out in point 1.4 follows certainly and uncontestably from the nature or the processing of the component material or the manufacturing process of the EU fertilising product, such compliance may be presumed in the conformity assessment procedure without verification (such as testing), under the responsibility of the manufacturer.